Install the fascia so the bottom edge of
the roof sheathing will rest on the 1x6.
Use a straight edge to aline the 1x6 boards
with the top of the trusses. Install fascia
with 8d galv. nails.
48" x 72"
48" x 48"
48" x 83-1/2"
48" Long
Panel
Sheathing layout for 12' x 16' Building
3.
If you are constructing a 16' long building install a 4' long 1x6 trim board in the center of the
building. Cut a 1x6-7' board flush with the roof sheathing and install at the front of the building.
83-1/2" Long Panel
Sheathing Will Extend
8-1/2" Beyond Gable
"
Roof sheathing panels not used for a 12' long building.
"
"
72" Long Panel
Remove From Pallet
1.
Starting at the rear of the building, install 1x6-6' white pine fascia boards on each side
flush with the face of the siding on the back gable.
Step 16 Install 1x6 Fascia & Roof Sheathing
1x6 -6' Fascia Board
2.
Install roof sheathing per layout below. Make sure the trusses are plumb and the roof sheathing
meets the center of the truss. Use 7d sinkers spaced 12" apart. The top row of roof sheathing
will be about 1" below the ridge to allow for ventilation. Important: Make sure the front gable
is plumb and the roof sheathing extends 8-1/2" past the siding along the face of the gable.
straight edge
Roof Sheathing