9
AUDIO BUTTON
How to enable Audio:
Turn on your meter and then press the Audio
button to enable audio indication. A short tone will play, and “ON” will
display momentarily on the screen. When audio indication is enabled,
the short tone will also play when you press other buttons. Exceptions:
when the Up or Down buttons are held down for SG scrolling, or when a
button does not register a specifi c result (e.g., pressing an Up or Down
button in Standard Measurement mode).
How to disable Audio: Press the audio button a second time to disable
all audio tones. No tone will play this time, and the word “OFF’ will be
displayed momentarily on the screen.
DEPTH BUTTON
NOTE: The D300 and S300 are single-depth models that do not include the
Depth button and the option to select the depth. The D300 takes readings in
¾” mode only, and the S300 takes measurements in ¼” mode only. If you
are using the DS500, you have the capability of selecting the measurement
depth (either ¾” or ¼”).
How to Select Depth When Using the DS500:
1. After the meter is turned on,
press the Depth button. In
Standard Measurement mode, you
will see a small trapezoidal bar
( ) indicating the Depth mode
currently selected. If the bar is
displayed in the upper left-hand