-
BESANTEK
5.4 Initialising-starting the test
• Quick test
TEST
A quick test ( less than 15 sec )
START, STOP
is done by depressing "TEST" for
less than two seconds.
• Long test
TEST
START/STOP
A long test ( up to 99.9 sec) is
done by depressing "TEST" for
more than three seconds.
5.5 Stopping the test
5.6
TEST
START/STOP
The test can be stopped at any
time by depressing "TEST" key.
The instrument will then auto
discharge the circuit and hold the
last stable reading.
Voltage decay can be observed on
the bargraph.
Main menu-new test-new selection
After termination of a test, the
TEST
main menu can be accessed by
depressing the "TEST" key. The
START' STOP
instrument will then display the
voltage selection menu and a new
test can be started.
-8-
