-1-
1. Safety Precautions
Electricity can cause severe injuries even with
low voltages or currents. Therefore it is extremely
important that you read the following information
before using your Digital RCD Tester.
1.1 This instrument must only be used and operated
by a competent trained person and in strict
accordance with the instructions. We will not
accept liability for any damage or injury caused by
misuse or non compliance with instructions and
safety procedures.
1.2 Never open Your Digital RCD tester except for
battery replacement. (See Battery replacement
section).
1.3 Always inspect you Digital RCD tester and test
leads before using for any sign of abnormality or
damage. If any abnormal conditions exist ( broken
test leads, cracked case, display faulty etc... ) do
not attempt to take any measurement or use the
tester.
Return your Digital RCD tester to your nearest
Distributor for Service.
1.4 Never replace the protective fuse with any other
than the specified or approved equivalent.
1.5 Your Digital RCD tester has been designed with
your safety in mind. However, no design can
completely protect against incorrect use. Electrical
circuits can be dangerous and/or lethal when a
lack of caution or poor safety
