Working
-30~70
°
C
Measuring
temperature
temperature accuracy
Size
125*28*22mm
Interval logg
i
ng
Weight
62g
Measuring area
Chapter II Instruction Manual
2.1 Instrument appearance instructions
0 0
21.8
0
Figure 2-1 Front appearance diagram
1
-
LCD display
±0.5
°
C
10s
About 50 rrl
0
0
□
□
2
-
OK button:
Instrument shutdown state, connected to PC set synchronize and time,
long press this button for 3 seconds, the instrument boot and automatically enter the
calibrat
i
on mode, press this button again equipment shut down, turned off after press this
button switch on the instrument into the recording mode.
When the instrument is turned on, press (short press) this button
,
the LCD will
switch the disp
l
ay (real-time data, minimum value MIN, maximum value MAX, alarm lower
limit LO, alarm upper limit HI cycle switching).
Instrument boot record state, long press this button for 3 seconds, the instrument off ..
3 - upper limit lamp : the temperature exceeds the upper limit state, the light is on every
10 seconds, indicating the measured temperature exceeds the upper limit.
4 - lower limit lamp : the temperature exceeds the lower limit state, the light is on every 10
seconds once, indicating the measured temperature exceeds the lower limit.
BESANTEK Corporation, CANADA
