-
BESANTEK
(3) AC Current measurement
• Set the function switch to ACA.
• Press the jaw trigger to open the transfomer jaw and
clamp onto one conductor only.
• Read the display.
X
(4) DC Current measurement
• Set the function switch to DCA.
*
If the inital reading of DCA is not zero, adjust the
"DCA zero adjustment shaft" until the display shows
zero.
• Press the jaw trigger to open the transfomer jaw and
clamp onto one conductor only.
• Read the display.
(5) Diode measurement
CAUTION!
Make sure that there is no voltage in the circuit or
components being measured.
-13-
BESANTEK Corporation
,
CANADA
