-
BESANTEK
(2) Go to the board where the circuit breakers are
located.
(3) Start the Sniffer (see starting the sniffer).
The Bar-Graph
shows that the first
circuit breaker
of the first row
has no signal on it.
It buzz very slow too.
The battery
voltage is ok.
You can go left and
right and change
row as you want to.
(4) Start sniffing the breakers by scanning the
breakers using the tip of the sniffer. The tip of the
sniffer is touching the body of the circuit breaker.
The bar-graph will indicates which circuit breaker
has the highest signal strength and the buzzer
will buzz faster on the one which has the highest
signal strength. Turn off that circuit breaker to
confirm that it's OFF. Turn-on again that same
circuit breaker to confirm it's ON.
This confirm which circuit breaker is supplying the
socket which has the Transmitter connected to it.
-11-