-
BESANTEK
Avoid bare hand to hand contact between the tester
and extended test leads.
When using the tester with test leads, ensure that
they are safe and properly authorized.
Disconnect the tester from any external circuit when
checking or changing the Fuses.
CAUTION
&
READ THE MANUAL
Follow the instructions in the Manual for every check.
Read and understand the general instructions before
attempting to use this tester.
2. Safety Check
Before using the tester check the condition of the test
leads and the fuses. This is done by using a prooving
unit.
The test leads must be free of cracks or any damages
and must be insulated as when they were new.
Fuse replacement is described later in this user's
manual.
When changing the fuses by removing the cover to
access the internal circuitry, always disconnect the
test leads.
-2-
