background image

2

3

!

!

Thank you for choosing BeSafe iZi Sleep ISOfix 

Contents

Vital information

BeSafe has developed this seat with much care, to protect your 

child during the first phase of her or his life.

Vital information 

3

Preparing to install  

4

iZi Sleep ISOfix usage 

5

ISOfix installation 

6

Removing iZi Sleep ISOfix 

10

Warning: potential misuse 

13

Important advice  

14

Point of sale information 

15

Guarantee 

16

It is NOT ALLOWED to mount the seat in a front 

• 

passenger seat WITH AN ACTIVATED AIRBAG.

iZi Sleep ISOfix can only be installed rearward-

• 

facing with the ISOfix anchorage in a car equipped 

with ISOfix anchorage points. 

iZi Sleep ISOfix is approved in group 0+, rearward-facing from 

• 

0-13 kg.

The floor support must always be used. Make sure that the 

• 

floor support is fully pushed down.

The child shall always be secured with the internal harness 

• 

belts when seated in the child seat, also by carrying and when 

used in combination with a push chair.

When installed with ISOfix: Make sure the indicators are green 

• 

before you drive.

When the child weighs over 13 kg or the shoulder height 

• 

grows above the highest position of the shoulder straps, the 

child must change to a group 1 seat.

DO NOT use the iZi Sleep ISOfix in sleeping position when 

• 

installed in your car.

After an accident, the seat must be replaced. Although it may 

• 

look undamaged, if you were to have another accident, the 

seat may not be able to protect your child as well as it should. 

It is important that you read this user manual BEFORE installing 

your seat. Incorrect installation could endanger your child.

Summary of Contents for iZi Sleep ISOfix










Reviews: