background image

18

19

Positioning the child

1. Position of the shoulder straps: Check that the shoulder strap 

slots are level with your child’s shoulders.

2. The height of the shoulder straps and the head rest can be 

adjusted by pulling the release handle upwards at the back 
of the head rest and pulling the head rest up or down while 
keeping the head rest upright. (54)

3. Pull the shoulder straps up while pressing the button of the 

central adjuster. (55)

4. Open the harness buckle.

5. Position the shoulder straps over the orange marking at 

sides of the seat to keep the harness open while you position 
the child. (56)

6. When the child is positioned, place the shoulder straps over 

the child’s shoulders and close the buckle: CLICK! (57)

7. Pull the harness strap through the central adjuster in the 

direction of the arrow straight up/forwards. Continue pulling 
until the harness is a comfortable but firm fit. (58) 

 ! Make sure that the harness straps are always locked and 

tightened when the child is in the seat.

Sleeping position

• The seat has 3 positions.
• By pulling the recline lever upwards, the seat can be 

adjusted into another position. (59)

• too high (52)
• correct (53)

• Do take care when you remove the cover, as fitting the cover 

is done in reverse.

• Start taking off the lower seat part. (60)
• The cover of the head rest can be taken off separately by 

disconnecting the hooks at the back and pulling off the 
fabric towards the front.

• Pull the head rest in the highest position. Replace the head rest 

cover and reconnect the hooks at the back side. Pull the harness 
straps through the holes. Connect the loose lower part of the 
head rest fabric with the plastic part below the head rest.

• Refit the top part and then the shoulder parts. Refit the 

seat part and bring the seat cover under the rear parts of               
the sidewalls. 

Removing and refitting the cover

Removing the cover

Refit the cover 

Cleaning instructions

• The cover of the seat must be washed according to the 

instructions on the inside of the cover.

• DO NOT use any aggressive cleaning products; these may 

harm the construction material of the seat.

Summary of Contents for IZI COMFORT ISOFIX










Reviews: