BES MDU12i, Modular Unit

Page: 28 / 41

DOC32 Page 28 of 41 Issue 2 30 NOV 17
Advanced Configuration page (hidden)
On entering the IP address followed by /config.htm in the top bar the operator, must be a
factory level user, is presented with the Advanced Configuration page which contains
advanced configuration details. The following screen shot shows the iMDU Advanced
Configuration and Meter Calibration boxes:
The iMDU Advanced Configuration box allows a number of factory configurable settings to
be changed, induding: System serial number, page copyright notice and product code and a
printable page can also be generated containing this information along with the system MAC
address.
The Meter Calibration box allows the meter to be calibrated. To calibrate voltage measure
the mains voltage [RMS] at the feed input, enter the value in the DMM field and click on
Calibrate. To calibrate current a RMS ammeter must be placed in series with an outlet and
load device eg. heater. Enter the amps value in the DMM field and click on Calibrate.
Logout button
Clicking on the Logout button the operator is presented with a blank page.