3
USER MANUAL HEATED SOLES
GENERAL OPERATION
The BERTSCHAT® heated soles heat your feet by means of an electric heating element. An internal battery provides
the soles with energy. The soles can provide heat in three positions. The position can be adjusted by means of the
button on the sole or on the remote control.
Caution:
The button on the sole is a push button, not a sliding button.
The sensor in the sole ensures that the temperature remains at the set value. Depending on the ambient
temperature and the insulation of the shoe, the sole will consume more or less energy.
STARTING AND CONNECTING THE REMOTE CONTROL
The first three times, the soles will have to be fully charged and used until the soles are discharged. In this way, the
battery is fully activated and will have its full capacity.
When charging, the LEDs in the soles turn red. When the battery is full, the colour turns to blue. For the first three
times of charging, a charging time of 8 hours should be maintained, irrespective of the colour of the LEDs in the
soles.
Connecting the remote control:
1.
Press the button of the sole for a few seconds.
2.
The sole now flashes red/blue.
3.
Now press button I, II or III of the remote control.
4.
The sole has now been connected and jumps to the set position.
5.
Repeat this process for the other sole as well.
6.
Now, the soles are connected to the remote control.
Summary of Contents for HEATED SOLES
Page 59: ...WWW BERTSCHAT EU...
