4
OPERATING TIME
The heating duration of the vest depends on several factors: primarily the ambient temperature and secondly the
level of insulation worn under and over the vest. Lastly, a high setting will obviously deplete the batteries faster than
any of the lower settings. It should also be noted that the batteries only reach their full charging capacity after a few
charging cycles.
Consider ordering an additional battery pack for longer use time.
SWITCHING OFF
The heating function is switched off by pressing the ON/OFF buttons until the LEDs no longer light up or alternatively
by simply disconnecting the batteries.
After use of the vest, always disconnect the batteries and keep them stored in their intended pockets. Store the vest
and the batteries in a dry and clean environment at room temperature.
ENERGY CONSUMPTION & POWER BANK
The vest works on any 5V USB power source, such as a telephone charger or laptop USB connection. For mobile use
a power bank will be necessary. Although any power bank with a 5V USB connection can be used in combination
with the vest, BERTSCHAT® recommends using the separately available BERTSCHAT® power bank designed for this
use.
Most USB power banks are equipped with a 1A or 2.1A connection. Though the vest will work on a 1A connection it
will be able to generate more heat when connected to a 2.1A connection. However, when using the 2.1A connection,
the power bank will deplete more quickly because more power is used.
It goes without saying that the more capacity the utilised power bank has, the longer it will be able to heat. Some
power banks must be switched on manually before they provide power. Both the power bank and the vest will then
have to be switched on before the vest can become warm.
Summary of Contents for HEATED HOODIE PRO - DUAL HEATING
Page 46: ...WWW BERTSCHAT EU...
