BERTSCHAT HEATED BODY WARMER PRO - DUAL HEATING, User Manual

Page: 6 / 51

6
WASHING INSTRUCTIONS
There are heating elements in the bodywarmer, which are sturdy, but can get damaged when handled roughly. Han-
dle the bodywarmer with care to prevent damage. Carefully place the power bank in the pocket. The power cable of
the bodywarmer may not be folded double. Make sure the USB plug and cable are not subjected to excessive force.
• Only wash by hand! Use a soft washing agent and handle the bodywarmer with care.
• Do not put the bodywarmer in the tumble dryer, only allow the bodywarmer to dry naturally and do not place it
on the heating or any other heat source.
• If the bodywarmer is damp, allow it to dry fully before charging.
• Do not dry clean the bodywarmer.
• Do not iron the bodywarmer.
TROUBLESHOOTING
If you notice that the bodywarmer doesn’t get warm, you can execute the following test:
• Is the power bank fully charged?
Check if the 4 white LED lights activate when pressing the button.
• Is the power bank connected correctly?
Check that the power bank is properly connected to the plug.
• Is the plug of the jacket free from contaminations?
Dirt in the plug could block the connection.
• Test if the jacket is working as follows: connect the jacket to a fixed USB power source, such as a smartphone
charger. If the jacket is working, it is possible that the power bank is defective.