REMOVING THE SAFETY HARNESS SHOULDER STRAPS
1. Release the strap at the bottom from backrest cover to gain access to the harness.
2. Slide off both harness straps of the harness connector at the back of the backrest.
3. Pull the webbing through the slots in the backrest and fabric cover.
REMOVING THE SAFETY HARNESS LAP STRAPS
Turn the webbing retainers on their narrowest end and feed them through the slots in the seat base and
than through the slots of fabric cover.
FASTENING THE SAFETY SEAT BUCKLE
1. Slot the two metal sections of the buckle connectors together.
2. Slot the two buckle connectors into the slot in the top of the buckle until they “click” into place.
3. Always check if the harness is correctly locked by pulling the shoulder straps upwards.
4. To release the harness press the red button on the buckle downwards.
TIGHTENING THE HARNESS
1. Pull the shoulder straps upwards to remove the slack from the lap sections of
the harness.
2. Pull the adjuster strap until the harness is fully tightened.
3. The harness should be adjusted as tightly as possible without causing
discomfort to your child.
4. Ensure that the lap strap portion of the harness is located as low as possible
towards the thighs (not around the tummy).
5. A loose harness could be dangerous. Check the harness adjustment and
tighten each time the child is placed in the seat.