Berthoud BOXER II-1800, Manual

Page: 38 / 62

38
82.475 / Boxer II
SPRAYING FUNCTION
- BOXER II 4000 R -
LIQUID STIRRING (AGITATION)
- Before spraying operations we recommend to stir the liquid to be spray so as to obtain a homogeneous
product:
- Electric control box off.
- Place all the valve handles in position
4
(figure 20).
SPRAYING WITH AGITATION 4
- Place all the valve handles in position
4
(figure 20).
SPRAYING WITHOUT AGITATION 5
- Place all the valve handles in position 5 (figure 20).
- I
n the 2 cases
:
- Set the forward handle (P) at neutral position.
- Start the motor.
- Preparation of control box (figure 21) :
- power up the control box by raising switch (1), lamp (a) lights,
- press the push-button (4) on handle (P),
- set the switches (2) to the left of the control box (5).
- Programmer le boîtier D.P.TRONIC. (Voir notice N
°
82.465) .
VOTRE APPAREIL EST PRET A FONCTIONNER.
OPERATION
- Increase engine speed to 2,500 rpm.
- TO SPRAY (figure 21)
- Set the switches (2) to the right of control box (5), the indicator lights (b) come on.
- Press the push-button (3) located on the forward handle.
- TO STOP SPRAYING (figure 21)
- COMPLETE STOP : Press the push-button (4) on handle (P).
- PARTIAL STOP
: Place the switch(es) (2) corresponding to the sections that you which to cut, to
the left of the control box (5).
PUMP START UP 11
- If the pump has drained it must be reprimed. To reprime the pump:
- Place all the valve handles in position
11
(figure 20).
- Once the pump is primed, turn the valve handles to the desired function.