Bertazzoni Master Series, Installation Manual

Page: 42 / 56

42
3. INSTALLATION INSTRUCTIONS
• Attach the door handle to the panel prior to
installing the panel on the freezer. Use handle
hardware that will ensure a secure connection
to the panel and that will lie flush against or,
in any case, not protrude from the back of the
overlay panel. This may require countersinking
the handle hardware into the back of the panel.
The door handle mounting screws must not
protrude either.
• Position the panel in the mounting bracket.
• Replace the bracket screws at the top and screw
in but do not tighten, so as to lightly secure the
panel.
• Use 3 screws (#13) to secure the mounting
bracket. Washers (#12) are provided and can be
used as spacers to raise or lower the freezer panel
as required, based on the specific installation.
• Tighten the screws once the freezer drawer
panel is perfectly aligned on the freezer drawer.
Washers can be used as spacers to raise or
lower the freezer panel as required based on
installation.
Washers to be used are determined based on the
kitchen design.
WARNING:
You will find more washers than you
need in the cardboard packaging. You can
use however many your kitchen design
requires.
INSTALLING THE FRIDGE DOOR PANEL
1. Attach the cabinet door to the fridge door.
Holes are in line