14
USA
Basic controls
Setting the clock
After your microwave oven is first plugged in or
after a power failure, the clock display will flash
to indicate that the time shown is not correct.
To set the clock, proceed as follows:
1. Press the
Clock
key for 6 seconds (not
necessary on first plug-in or after a power
failure). The hour numbers will start to flash.
2. Pr
ess key “
-
” and “
+
” to set the hours.
3. Press again the
Clock
key to set the
minutes. The minute numbers will start to
flash.
4.
Press key “
-
” and “
+
” to set the minutes.
5. To finish, press the
Clock
key again.
Displaying the Clock
To save energy, the clock is normally hidden.
If you want to see the clock, press the
Clock
key briefly and the clock will be visible.
Safety blocking
The oven functioning can be blocked (for
example, to stop it being used by children).
1. To block the oven, press the
Stop
key for 3
seconds. You will hear a sound signal and
the
display
will show the word “SAFE”. The
oven is blocked in this state and cannot be
used.
2. To unblock the oven, press the
Stop
key
again for 3 seconds. You will hear a
sound signal and the
display
will show
the time again.
