19
How to disable the sound alarm:
To disable the sound just touch one of the keys.
Operating again the
oven
Once a s
e
mi-automatic or automatic cooking has expired, on the display appear the
current time and the blinking AUTO symbol. In this condition, the heating elements
and the light bulb of the oven are disabled. To enable again the oven, just touch and
keep the M key up to see the symbol POT on the display and the AUTO symbol
disappears
.
OTHER FUNCTIONS
How to delete a cooking time
(semi-automatic or Automatic)
To delete a semi-automatic or automatic
c
ooking program, with the A symbol on,
touch together the - and + keys for at least 2 seconds or anyway up to see the POT
and the disabling of AUTO symbol
.
How to delete the countdown timer
To delete the counting of the timer, which symbol is )
t
touch the M key for at least 2
seconds or anyway up to see the ) symbol blinking
.
Touch together the - and + keys.
Checking the function settings
The set or remaining time of every cooking function of the programmer can be
recalled to the display by
e
nt
e
ring in program mode with the M key. Touch and keep
the M key for almost 2 seconds or any
w
ay up to see the BELL symbol
.
The
remaining time appears on the display, or a series of zero numbers if the timer is
disabled. Touch again the M key
.
On the display appears th
e
"dur" writing, then
alternately the remaining time or a series of zero number (disable timer)
.
By touching again the M key, the end of cooking time appears together with the
"End" writ
i
ng.
How to change the current time or the sound level
With the programmer in standard mode, the (2) symbol is on, touch together the -
and + keys for at least 2 seconds or anyway up to see the dot (3) blinking
.
To update the hour on the display:
touch the + or - keys.
To change the sound level:
touch the M key. On the display appears the writing:
Ton.. followed by a number
.
Select with the - key your favourite sound level
.
Note: number 1 is referred to the highest sound level
.
The available levels are 3.
Attention:
Power cut causes the
l
oss of any program, even the clock; that means
the programmer will have to be set again
.
