Bertazzoni F1SM24 2 Series, Instructions For Installation And Use Manual

Page: 11 / 36

10 11
GB
Cooling fan
TANGENTIAL COOLING
A forced air circulation system
which contributes to reducing
the heat exchange temperature
in the front and lateral areas of
the ovens.
Thermostat
10 11
GB
Timer touch control
Setting the clock
Fig. 1
“Auto” and “0:00” will start flashing
when the unit is switched on for the first
time. To set the clock, press the central
button for about 3 seconds. When
appears, press “+” or “-“ to set the
correct time.
Wait until a beep tells you that the clock
has been set (figure 1).
To set the time at a later stage, press
“+” and “-” together for 3 seconds and
then adjust the clock as described
above.
Minute counter
Fig. 2
As this minute counter does not control
the oven, when it finishes counting the
oven will continue to work.
To set, press the central button for 3
seconds until appears (figure 2).
Press “+” and “-” to set the required
time.
To set the minute counter at a later
stage, press the central button for 3
seconds and adjust as described
above.
The minute counter beeps when it
finishes counting. To disable it, press
any button.
Cooking time
Fig. 3
This is a semi-automatic cooking
function. It can be used to set cooking
times.
Press the central button for 3 seconds.
Then press it again until “dur” appears
(figure 3). Press “+” and “-” to set the
required cooking time.
End of cooking time
Fig. 4
The end of cooking time can also be
set.
Press the central button for 3 seconds.
Press the central button twice
consecutively and wait for “End” to
appear (figure 4). Press “+” and “-” to
set the required end of cooking time.
The oven will work in the set mode and
at the set temperature until the end of
cooking time.
11
GB