Bernini RF-1 Owner'S Manual Download Page 11

7

Fill Your Fountain

Fill the fountain until water circulates through the system. You can remove the access 
panel cover on the back to access the reservoir and add additional water if necessary.

Operating Your Fountain

The on-board control panel is located on the side of the fountain. See the diagram below 
to see how the all-new on-board controls work for your Bernini Fountain.

Music Features

Selector/Volume

System ON/OFF

Status Light

Music Features

ON/OFF

BUTTON

DESCRIPTION

(System ON/OFF)

1. When the system is OFF, press and hold the A button to 

turn ON system and pump. 

2. When the system is ON, press and hold the A button to 

turn OFF the system and pump.

B

 (Music Features 

ON/OFF)

1. Press ONCE to turn ON the speaker.
2. Press TWICE to turn ON the internal music system.
3. Press THREE TIMES to turn on BLUE TOOTH.  Green status 

light will blink indicating that BLUE TOOTH is ready.  Refer to 
device manufacturer’s instructions to turn on BLUE TOOTH on 
your iPhone, Android, or smart device.

C

 (Music Features 

Selector/Volume)

1. Short Press - cycles music selection backwards.
2. Long Press - turns down volume.

D

 (Music Features 

Selector/Volume)

1. Short Press - cycles music selection forward.
2. Long Press - turns up volume.

Music Features

Selector/Volume

You can now try your Bernini fountain to see if everything is working correctly! 
Turn your fountain on and if you see water 

fl

 owing, you are ready to enjoy 

your new Bernini Fountain. 

If water is not 

fl

 owing, try priming the water 

pump.  Instructions are on page 10.

Summary of Contents for RF-1
















Reviews: