10
Cleaning the Water Pump’s Parts
Water Pump Air Filters
After about six weeks of usage, you may want to clean the water pump’s filter and impeller to keep
your Bernini Fountain in tip-top shape.
Remove the front of
the water pump by
grabbing the sides of
the front panel and pull
it off the unit.
Remove the impeller
chamber cover. This is
tightly fitted on to the
impeller chamber, but
will come off.
Remove the impeller
from its chamber.
Rinse the impeller
until all debris has been
removed. Then replace
the impeller in the im-
peller chamber, put the
impeller chamber back
on and then replace the
pump’s front panel.
Remove the front of the water
pump by grabbing the sides of
the front panel and pull it off
the unit.
Pull the water pump filter from
the front panel.
Wash the filters under running
water until debris has been
removed. Then replace the
filters and pump’s front cover.
Water Pump Impeller
The impeller inside of the water pump is what pushes water up through your fountain, allowing you
to enjoy the soothing sounds and wonderful sights of your Bernini Fountain. After long periods of
usage, this part will need to be cleaned to make sure your fountain runs optimally.
Cleaning your Fountain
In order to keep your fountain in tip-top shape and free of algae, you should clean your fountain
every two months. To clean your fountain, drain of all water and disassemble. Use a mild soap
and a soft cloth to clean the parts of your Bernini™ fountain. Your fountain bowl will form a natural
patina finish which with time may appear lighter or whiter than the original color. This is normal. DO
NOT SCRUB YOUR FOUNTAIN, AS THIS COULD CAUSE DAMAGE TO THE FINISH OF YOUR
BERNINI™ FOUNTAIN.
Remember!
If you ever need help, you can contact our customer care at:
+442036171773 or [email protected]