Need Help?
Call us for assistance at:
+1 (619) 449-2392
or you can email us at:
Our Customer Care Department is available:
Monday - Friday
8:30am to 4:00pm PST
11:30am - 7:00pm EST
Troubleshooting
Troubleshooting Guide
O W N E R S M A N U A L
4.
STEP
Care & Maintenance
5.
STEP
IMPORTANT BATTERY SAFETY INSTRUCTIONS:
PROPOSITION 65 WARNING: This product can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information to www.P65Warnings.ca.gov.
WARNING: When using electric devices, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following:
WARNING: 1. Do not incinerate the battery even if it is severely damaged or is completely worn out. The battery can explode in a fire. Check with municipal codes in your area for possible special disposal
instructions.
2. If liquid leaks from the battery cell, discontinue use immediately and dispose of properly.
3. Use only 4-1.5V D Cell Batteries.
4. Do not attempt to disassemble, remodel or destroy the batteries, as it may cause battery leakage, fire, or bursting; and could also create sulfuric acid spills from the battery resulting in possible burns to
person and damage to the immediate environment.
5. Never dispose of batteries in the garbage. Disposal of batteries in the garbage is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-re-
cycling center.
Step 1
Step 2
Step 3
Step 4
PRIMING THE WATER PUMP
If you find the Water Pump is running, but water is not
flowing from your Fountain, you can try priming the Water
Pump:
Turn off Fountain, grab both sides of the Fountain and
quickly shake your Fountain for ten seconds. This is to
dislodge any air bubbles that may be caught in your Water
Pump. Press the button to turn your Fountain on.
Water should be flowing from the top of your Fountain. If
water is not flowing, press and hold button for over 2
seconds again to turn your Fountain off, and repeat the
step above.
WATER PUMP CONNECTION
If your Fountain Water Pump becomes disconnected from
the Water Tube inside of the Fountain or if the Water Tube
gets disconnected from the Battery Compartment, go to
the Assembly Section to reconnect the Water Pump.
Flippable Fountain Tower
TM
Indicator light not turning on: Check batteries are installed correctly: See Installing Batteries Section.
Indicator light not turning on: Check that batteries are new & good condition: See Installing Batteries Section.
Pump is on but no water flow: Check water level.
Pump is on but no water flow: Check pump is free of debris, kinks or obstructions. See Care & Maint. Section.
Pump is on but no water flow: Check tube is connected properly. See Installing Batteries Section.
Indicator light on: Check that batteries are new and good condition. See Installing Batteries Section.
Pump is on but low water flow: Check pump is free of debris, kinks or obstructions. See Care & Maint. Section.
Pump is on but low water flow: Check water level. Air in pump: See Priming The Water Pump Section.
Loud sound and weak flow: Air in pump: See Priming The Water Pump Section.
Loud sound and weak flow: Check pump is free of debris, kinks or obstructions. See Care & Maint. Section.
Pump suddenly stops: Check pump is free of debris, kinks or obstructions. See Care & Maintenance Section.
Step 1
Step 3
Simply remove the Battery Compartment, Water Tube & Water Pump Assembly flip the Flip Tower, set the
Battery Compartment, Water Tube & Water Pump Assembly back into the Flip Tower and you have a new
look for your Flippable Fountain, One Fountain two unique looks.
Step 2
FLIPPING THE FLIPPABLE FOUNTAIN:
CLEANING YOUR FOUNTAIN
In order to keep your Fountain in tip-top shape and for a prolonged life, it is best if your
Fountain and the bowl or water container that the Fountain is placed in are cleaned
periodically. To clean your fountain, drain of all water and disassemble. Use a mild soap
and a soft cloth to clean the parts of your Fountain.
COLD STORAGE
Turn power off, remove from container, clean and dry the Fountain of all water. Remove the
batteries for long term storage and bring it indoors. (Now is a great time to clean the pump
to remove any debris that may have accumulated throughout the year).
CLEANING THE WATER PUMP’S PARTS
The impeller inside of the Water Pump is what pushes
water up through your Fountain, allowing you to enjoy the
soothing sounds and wonderful sights of your Fountain.
After long periods of usage, this part will need to be
cleaned to make sure your Fountain runs optimally.
Step 1: Remove the front panel of the Water Pump by
grabbing the sides of the front panel and pulling it off the
unit.
Step 2: Remove the impeller chamber cover. This is tightly
fitted but will come off.
Step 3: Remove the impeller from its chamber.
Step 4: Rinse the impeller until all debris has been
removed.
Step 5: Re assemble in reverse order.