14|
Remember if you need help contact Customer Care: 1+ (619) 449-2392
Step 1:
Submerge the Water
Pump(s) into the water inside the
Large Bowl and lightly shake the
pump underwater to release air
bubbles inside the vents on the
Water Pump.
Step 2:
Plug the fountain in
to turn on
turn the fountain on
and you should see water flowing
from the pump. Let the pump run
for about ten seconds and then
unplug the power to turn your
fountain off.
Step 3:
Reconnect the Water
Pump to the feeder tube inside
the fountain bowl and reattach
the Fountain Tier to the Large
Bowl.
Priming the Water Pump (Continued)
Water Pump Connection
If your Bernini™ Fountain did not come with the water pump already connected to the tube
inside of the fountain tier or if the water pump gets disconnected from the fountain tier, use
these instructions to reconnect your water pump.
Step 1:
Remove the fountain tier by turning
the fountain tier
counter clockwise unscrewing and then lift off. Rest the fountain
tier on its side
.
Step 2:
Connect the male outlet
on the top of the water pump to
the tube inside of the fountain
tier. Make sure this connection
is snug.
Then reassemble the fountain
tier with the instructions on
page 3.