background image

M

ASTERING

 Y

OUR

 

BERNINA

®

 1/04/02

virtuosa 

153 QE/163

/32

BERNINA

®

 

virtuosa 

153 QE/163

M

ASTERING

Y

OUR

BERNINA

®

NECKLINE HEM

Fabric:

Single knit cotton – 4” x 6”

Needle:

80/12 Universal

Thread:

All-purpose

Presser Foot:

Reverse Pattern Foot #1

Owner’s manual pg.___
• Cut a curve to simulate a neck edge in one corner.
• Sew a line of stay-stitching, 

3

/

8

” in from the neck edge using the straight stitch adjusted to a

  length of 5mm.
• Turn the raw edge under and press or baste in place.
• Select the Honeycomb Stitch (#14 on the 153QE and #16 on the 163).
• Sew from the right side ¼” from the folded edge.
• Trim surplus fabric from wrong side, close to the stitching.

Notes: - If the hem stretches, add a strip of Stitch Witchery

®

 to the edge as it is

  stay-stitched.

Using the Needle Stop Down function will keep the fabric in place when

  sewing curves.
- The Balance function can be used to make the stitches closer together or
  farther apart.

• Press and mount the sample.

Summary of Contents for virtuosa 153 QE








































































































Reviews: