Notes
M
ASTERING
Y
OUR
BERNINA
®
S
ERGERS
6/2006
66
©2006 BERNINA
®
of America, Inc.
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA
®
Dealers
Mastering
Your
BERNINA
®
Sergers
Narrow Three-Thread Overlock
Using the small screwdriver and brush/needle insertion tool, loosen the
right needle screw and insert the right needle. Hint: Place the point of the
needle directly above the right needle space of the presser foot, then lift
the needle up to place the shank in the correct hole. Snug right needle
screw.
Remove the left needle. Snug the needle set screw after removing the
left needle.
Following the diagrams in your owner’s manual, thread the serger for a
narrow 3-thread overlock stitch. Adjust all settings for a balanced stitch.
Adjust cutting width to 2mm (normal).
Adjust stitch length to 2.5mm (normal).
Fold the fabric in half to 2½” x 6”.
Serge along the folded edge of the fabric.
Trim and mount the sample.
Fabric .................................................................lightweight fabric, 5” x 6”
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 3 cones serger thread
Presser Foot .............................................................................. standard
Stitch ................................................................ narrow 3-thread overlock
Downloaded from
www.Manualslib.com
manuals search engine