29
DIFFERENTIAL FEED
Gathered Overlock (1
–
2.0)
–
Differential feed is a system which "stretches"
or "gathers" the fabric, when the amount of feed
of front feed dogs in relation to the rear feed
dogs is changed.
–
The differential feed ratio ranges from 0.6–2.0.
Adjustment is made by means of the differential
dial pictured at left.
–
Use of differential feed is very effective in
overedging stretch fabrics and fabrics cut on the
bias.
–
Setting "1" is differential dial setting for ratio 1:1.
Gathered overlock is most suited for shirring sleeves,
yokes, front and back bodices, skirt hems, etc. in
stretch fabrics such as knits and jersey before
assembling into garment.
• To set the differential dial for gathering
–
Set differential feed adjusting dial above setting
"1".
–
Setting of adjusting dial depends on material
being sewn as well as the amount of desired
gather.
–
Therefore set dial to suit the fabric and test sew
before sewing your garment.
PLEASE NOTE:
For normal overlock stitching, set differential
feed adjusting dial to graduation “1”.
