2
Safety Instructions
SAFETY INSTRUCTIONS
IMPORTANT
INFORMATION
When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all the instructions before using this
sewing-/embroidery computer.
When the sewing-/embroidery computer is not
in use, it should be disconnected from the
electricity supply by removing the plug from
the outlet.
DANGER!
To reduce the risk of electrical shock:
1.
The sewing-/embroidery computer should
never be left unattended when plugged in.
2.
Always unplug this sewing-/embroidery
computer from the electrical outlet
immediately after using and before cleaning.
3.
LED Radiation – Do not view directly with
optical instruments. Class 1M LED product.
WARNING!
To reduce the risk of burns, fire, electric shock or
injury to persons:
1.
Use this sewing-/embroidery computer only
for purposes as described in this manual. Use
only attachments, accessories and parts
recommended by the manufacturer.
2.
Do not allow this sewing-/embroidery
computer to be used as a toy. Close attention
is necessary when this sewing-/embroidery
computer is used by or near children and
infirm persons. The sewing-/embroidery
computer is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the sewing-/embroidery
computer by a person responsible for their
safety. To ensure children do not play with
the sewing-/embroidery computer they must
be supervised.
3.
Never operate this sewing-/embroidery
computer if:
⦁
it has a damaged cord or plug
⦁
it is not working properly
⦁
it has been dropped or damaged
⦁
it has fallen into water
Return the sewing-/embroidery computer to
your local authorized BERNINA dealer for
examination or repair.
4.
Never operate the sewing-/embroidery
computer with any air openings blocked.
Keep ventilation openings of the sewing-/
embroidery computer free from the
accumulation of lint, dust and loose cloth.
5.
Keep fingers away from all moving parts.
Special care is required around the sewing
needle.
6.
Never insert any objects into any openings on
the sewing-/embroidery computer.
7.
Do not use the sewing-/embroidery computer
outdoors.
8.
Do not operate the sewing-/embroidery
computer where aerosol products (sprays) or
oxygen are being used or where oxygen is
being administered.
9.
Do not pull or push the fabric while stitching.
This may deflect the needle, causing it to
break.
10.
Do not use bent needles.
11.
Always use the original BERNINA stitch plate.
The wrong stitch plate can cause needle
breakage.
12.
To disconnect, turn power switch to «0» (off),
then remove the plug from the outlet. Do not
unplug by pulling the cord, instead grasp the
plug to pull it from the outlet.
13.
Turn power switch to «0» (off) when making
any adjustments in the needle area, such as
changing the needle or the presser foot, etc.
14.
Always unplug the sewing-/embroidery
computer from the electrical outlet when
carrying out cleaning or maintenance work or
any other user servicing adjustments
mentioned in this manual.
15.
This sewing-/embroidery computer is provided
with double insulation (except USA and
Canada). Use only identical replacement
parts. See instructions for servicing of double-
insulated products.
0365315.0.04_2015-05_Manual_B570QE-B555_EN
Summary of Contents for 555 QE
Page 1: ...BERNINA 555 570 QE...
