Embroidery preparation
51
Overview embroidery functions
2
1
3
4
5
1
Centering the embroidery hoop to the needle 4
Grid on/off
2
Moving the embroidery hoop to the back
5
Embroidery motif center
3
Moving the embroidery arm to the left
6
Virtual positioning (appears by scrolling)
Center the needle to the embroidery hoop
Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
P
> Touch the icon «Center the needle to the embroidery hoop».
> Threading the upper thread.
> Push the button «Start/Stop» to move the embroidery hoop back to the last position.
Moving the hoop to the back
To facilitate changing the bobbin, it is recommended to move the hoop to the back before threading. This
makes it easier to open the bobbin cover.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
P
> Touch the icon «Move the hoop to the back».
> Thread the bobbin thread (see page 43).
> Push the button «Start/Stop» to move the embroidery hoop back to the last position. Pull the upper
thread back if necessary.
Moving the embroidery arm to the left
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Remove the hoop.
P
> Touch the icon «Move the embroidery arm to the left».
– An animation «Remove the embroidery hoop» appears.
> Touch the icon «Confirm» to bring the embroidery hoop to the left into the parking position.
Summary of Contents for 500 E
Page 1: ...BERNINA 500...
Page 157: ......
