Embroidery preparation
43
> Push the engaging lever (5) towards the bobbin.
5
– The machine winds and the display to wind the bobbin appears.
> Move the slide on the display using the touchscreen pen or the finger to adjust the winding speed.
> To stop the winding process, the engaging lever must the pressed to the right.
> Push the engaging lever towards the bobbin again to continue the winding process.
– As soon as the bobbin is full, the machine stops the winding process automatically.
> Remove the bobbin and cut the thread using the thread cutter at the engaging lever.
Threading the bobbin thread
Prerequisite:
•
The needle is raised.
•
The machine is switched off and the bobbin cover is opened.
> Press the bobbin case release at the bobbin case (1).
1
> Remove the boobin case.
> Remove the bobbin from the bobbin case.
Summary of Contents for 500 E
Page 1: ...BERNINA 500...
Page 157: ......
