![Bernina 500 E Manual Download Page 49](http://html1.mh-extra.com/html/bernina/500-e/500-e_manual_2738622049.webp)
Embroidery preparation
50
> Place the material and the inner hoop on the outer hoop so that the arrows of both hoops match.
> Fit the hoops into each other; ensure that the material does not move.
> Hoop the fabric to be embroidered tightly.
> Tighten the screw.
> Remove the template from the hoop by using the template holder.
Attaching the hoop
> Raise the needle.
> Raise the embroidery foot.
> Hold the hoop with the right side of the fabric up with the attaching mechanism to the left.
> Position the hoop under the embroidery foot.
> Press both attaching mechanisms (1) of the hoop towards each other.
> Position the embroidery hoop (2) above the bracket of the embroidery arm.
> Press the hoop down until it clicks in position.
> Release the attaching mechanism (1).
1
1
2
> Press the attaching mechanisms of the hoop towards each other to remove the hoop.
> Remove the hoop.
Summary of Contents for 500 E
Page 1: ...BERNINA 500...
Page 157: ......