7
EXPRESS RELIEF
© Bernhard and Company Limited
These instructions assume that the Express Relief has been correctly fitted to the lift table
of an Express Dual according to the supplied fitting instructions.
3.1
If the Express Relief is in its "lowered"
position, supported on the lift table
platform, lower the lift table platform to the
ground.
3.2 Slide the grinding head the left hand side of the guide
rail and pivot the Express Relief about its mounting, to the
vertical position and hold in position with the locking pin.
3.3
Place the cutting unit on the lift table, front facing away from the machine and raise the
platform so that the cutting unit can be slide onto the machine table.
3. User Instructions
