Enter a sequence of stitch patterns in
Memory Enter Mode
Precondition: Empty Memory (see page 77
to clear Memory)
Press the memory button to enter Memory
Enter Mode.
Use selector wheel to select desired stitch.
E.g. stitch 25
The stitch number starts flashing.
Memory Mode active is shown by "
"
indication under the stitch number.
Before pressing set/disp button:
- The parameters of the selected stitch, such
as stitch length and stitch width, mirroring
and twin needle, may be adjusted by
pressing the corresponding button.
- The stitch can be test sewn by pressing the
start/stop button or the foot controller.
Note, that the machine will automatically
stop sewing at the end of the stitch.
Please note:
1st memory position
1st memory position
Press set/disp button to memorize it.
After pressing mem position will be shown
for 2 seconds (01 = first memory position)
1st memory position
Special Functions
67
