24
HOW TO CHANGE THREADS
Tie on method
–
To change thread type or color, clip thread near
the spool.
–
Place new thread on stand.
–
Tie new thread and old thread ends together
with a square knot. Clip thread tails to 2–3cm
(1 inch) length. If clipped too short, threads may
come untied.
–
Firmly pull both thread to test knot security.
–
Raise the presser foot to open the tension
discs.
–
Pull the threads through the machine one at a
time.
–
If threads do not pull easily, check for tangles on
thread guides or looping under thread stand.
–
When pulling thread through the needles,
STOP when the knot is in front of the needle.
–
Cut the knot and thread the threads in the
needle eye.
