26
Cleaning the Bobbin Case and the
Shuttle Race
Removing the shuttle race unit
Raise the needle to its highest position and open the
bobbin cover.
Open the hinged latch of bobbin case and take it out of
the machine.
Open the shuttle race ring holders and remove the
shuttle race ring.
Remove the shuttle.
* Clean the shuttle race with a brush and a soft dry cloth.
Bobbin case
Shuttle race ring holder
Shuttle race ring
Shuttle
Shuttle race
Assembling Shuttle Race Unit
Hold the shuttle by the center pin and fit it carefully back
into the shuttle race, forming a perfect circle with the
shuttle driver. Attach the shuttle race ring making sure
the bottom pin fits into the notch. Lock the shuttle race
ring by turning the holders back into position. Insert the
bobbin case.
Pin
Notch
WARNING:
Always switch off the power switch and/or unplug
the machine from the power supply before disas-
sembling or cleaning the machine.
The machine must only be disassembled as
described in this section.
CAUTION:
Do not store the machine in a high-humidity area,
near a heat radiator, or in direct sunlight.
CARE OF YOUR MACHINE
