Berner BI1EG2.5B, User Manual

Page: 15 / 44

Page 14 of 44 17.07.2014
Ver. 3.3 © Berner Kochsysteme 2015
Unit ON and OFF switch
Position OFF: Position ON:
`0` point to the marking ( ο ) `I` point to the marking ( ο ).
Performance controller
(Depending on model and option various knobs be used)
Any position between: MIN (minimum) and MAX (maximum) that points towards the marker
(
ο
). The choosed performance is displayed.
Position OFF: Position OFF with keep warm function:
`0` point to the marking (
ο
) 0` point to the marking (
ο
)
Position ON: Position ON with keep warm function:
Any position between: MIN and MAX that points towards the marker (
ο
).Unit ON. Before
performing the function test, the user must know how to use the induction.
Function with keep warm function (optional)
How do i work with the keep warm function
To use this function with knob (W70-W110)
or
with the touch control panel. If the keep warm
function is active please take ACCOUNT that the cookware always have to place in the
middle of the cooking zone (temperature feeler-coil).
Keep warm function with potentiometer (4-digit display)
With the potentiometer can be choosed a temperature between 70-110°C instead of the
regular performance steps 1-2-3. If the controller is raised higher than W110 the display
change to the regular used steps 4-9. Examples below:
Desired temperature 70°C ( . ), real temperature to low ,
Heating: point right side of the number
Real temperature 25°C (all 10 sec.), real temperature to low ,
heating: point right side of the number
Desired temperature 70°C ( . ), real temperature in range +/- 2°C,
No heating
Real temperature 105°C, Real temperature to high,
No heating
H