Berner 177903, Operation Manual

Page: 7 / 24

6
Battery replacement:
Open battery cover to the right side. Replace battery, with anode outside.
Now close the battery cover very carefully.
Notes:
Please prepare with measuring very carefully. Keep surfaces clean.
The caliper should be regularly cleaned with cotton-cloth.
Do not use petrol. Do not expose the caliper direct to the sun light,
ultraviolet rays or extreme temperatures.
Prevent it from any shock and do not immerse the caliper in any liquid.
Electric etching or engraving by high voltage can destroy the electronic
chip, no warranty will be given!
Never dismantle the caliper housing.
The battery should be taken out, if no use for a long time.
Do not give used batteries in refuse.
Please give it to a special collecting depot.
Functions
(Page 2)
: Specifications:
1. ON/OFF Measuring range: 0 – 60mm
2. Zero key Resolution: 0.01 mm, 0.0005“
3. Hold-button max. Accuracy: ± 0.04 mm
4. Battery-cover max. operational speed: ± 1.5 m/sec.
5. Data output Repeating accuracy: ± 0.01 mm
6. Fixing screw Power supply: battery 1.55 V, Typ SR44)
7. Metric / Inch conversion Storage temperature: 5°C bis 40°C
8. Display Humidity influence: 0 - 80%
Electr. digital caliper
Operation manual
EN