Bernecker + Rainer 4MP181.0843-03, User Manual

Page: 36 / 160

36
Technical Data • Individual Components
Mobile Panel User's Manual V 1.5
Type Plate
General Information
Regarding the enable switch, the Mobile Panel device is additionally equipped with a type plate
with the following information.
Design/Dimensions
The type plate is attached to the back of the Mobile Panel operating unit.
3.1.7 Switches, Buttons and Batteries
The following buttons and switches are found on the back of the operating unit for setting
parameters and configuring the Mobile Panel motherboard:
Mode / Node Switch
Power Panel devices are equipped with 2 hex switches, which are used as an operating mode
switch for Automation Runtime devices. Switch positions 01 up to FD are available for any
purpose in an application. The switch's position can be evaluated by an application program.
Figure 14: Design/dimensions of the type plate
Figure 15: Back of the operating unit - switches, buttons and batteries
Operating voltage/current
60 mm
14 mm
R2
Protection
Design, category
060001426 www.br-automation.com
24 VDC 25% / 0.4 A IP54 ±
Enable switch (3-step)
AC12/DC12
060001426 www.br-automation.com
24 VDC 25% / 0.4 A IP54 ±
Enable switch (3-step)
AC12/DC12