Q-
tag
CLm
doc
LR
&
CLm
doc
Ice
R
Option 1: To initiate a shipment,
press and hold the START/STOP
button until the display starts up.
Option 2: After reactivation with
the software easy go and
disconnecting the device from the
USB interface
Option 3: After preconfigured
autostart date and time
Important:
Before reactivation of
a Q-tag CLm doc LR or Q-tag
CLm doc Ice R device you must
connect the device to a USB port,
please read out the recorded
data, otherwise the recorded data
will be lost!
Active recording is shown by the
(OK symbol) or
(ALARM
symbol) and the flashing dot on
the LCD.
Expiry date:
Please always verify the expiry date prior to using any device.
Expiry date explanation: Example exp 2020-01: In this example the expiry date of the device is January
2020 or 365 days after first use.
Q-tag easy go software
Reconfiguration and backup
The Q-tag easy go software is used to activate and reconfigure Q-tag CLm doc LR and Q-tag CLm doc
Ice R devices as well as to safeguard the collected data.
Contact us to get the software: [email protected]
More information:
Berlinger & Co. AG
User Manual Q-tag CLm doc devices - 2
Page 13 of 37
