3
1) Foreword / introduction
2) Before commissioning
2.1) Delivery status
2.3) Device Explanation
The Berlinger Mini-tag
®
is a very small but extremly powerful temperature-monitoring device. It
measures the ambient temperature precisely and continuously. There can be up to 3 alarm limits
programmed and monitored individually. If a temperature limit is exceeded or undershot, an alarm will
be immediately triggered and visually displayed via the LED indicators on the device (OK or ALARM
icon).
The Berlinger Mini-tag
®
is delivered in inactive mode. Any customer-specific alarm configurations
have been factory pre-programmed. Currently, no temperature data is being recorded. The Berlinger
Mini-tag
®
must be started before the measurement mode starts.
(see Chapter 3: Activation)
2.2) Quality test
The device has passed the necessary high-quality controls at the manufacturer. For the avoidance of
transport damage, we recommend checking the following points before using the Berlinger Mini-tag
®
:
• The LED displays on the front of the panel are not blinking
• All components as described under Point "2.3 Device Explanation" are available.
STOP break off tab
LEDs
(green = OK / red = ALARM x)
READ button
(for status query, optional to
start / stop)
START break off tab
2D Code
contains the following
information:
• CID
• Customer
• Expiry date
• Serial number:
Example:
999C22E1503S1234567
2.4) Alarm programming
Three different alarm limits can be programmed. Alarm limits can be defined with temperature and
time (cumulative or single event). The alarm limits are programmed at the factory and cannot be
changed upon receipt of the device.
