The display shows the menu „SET DATE“.
Press READ
until
the display shows „READ CONF“. Then
Press
SET
to access
the menu to read the current alarm configurations. First the display
check appears. Then continuously press
READ
to scroll through
the pre-set alarm parameters.
*Changes of the alarm limits are only possible for devices which
are programmed with this feature.
The display shows the menu „SET DATE“.
Press READ
until
the display shows „CELS FAHR“. Then
Press SET
to access the
menu to change the temperature measurement unit. To change the
measurement unit (Celsius / Fahrenheit)
press READ
until the
display shows the desired sign (°C/°F).
Press SET
to confirm
the mesurement unit.
The display shows the menu „SET DATE“.
Press READ
until
the display shows „SET CONF“.
Press SET
to access the menu
to change the alarm configurations. To change the alarm limits
(duration or temperature) please proceed as described in chapter
„Setting the alarm limits“.
• The number of time adjustments during the same day is un-
limited.
Note:
After the adjustment has been done, the Fridge-
tag
®
2 L will be locked for 24 hours after the clock passes
midnight and through the entire next day.
(e.g. changes on the
15th Sep., device locked from 00:01 am on the 16th until 00.01
am on the 17th). This is for security reasons.
NOTE:
If you experience this problem please wait for the time
on the device to cross over midnight and try again.
6.2.2) Access the menu „READ CONF“
6.2.3) Access the menu „CELS FAHR“
6.2.4)* Access the menu „SET CONF“
20
