Page 3 of 6
USER MANUAL BEREG-Kit small
Blood Sample Container
www.berlinger.com
HANDLING INSTRUCTION
PREPARATION
• Please make sure that the BEREG-Kit small is intact and
that the pre-sealing of the security plastic bag and the
shrink sleeve wrap of the containers are still intact.
• Please check if all components of the BEREG-Kit small
have the same unique number on:
1. The containers
2. The security caps
3. The security plastic bag and labels
SECURITY CAP
Make sure that all the caps’ elements are in place:
1. The white stopper
2. The grey spring clip
3. The grey metal ring
RED RING
Please note: Remove the red ring before closure!
HANDLING THE BEREG-KIT SMALL
The BCO is to proceed with the blood collection procedures as
outlined by the guidelines for blood sample collection (WADA
guidelines). As soon as the blood samples are ready, place one sample
into the A-container and the other sample into the B-container.
Under direction and supervision of the BCO, the athlete must:
• Double check that all the numbers on all components are identical.
• Remove the red rings (which prevent the accidental closure of the
containers).
• Insert the blood tube into the A- and B-containers as directed.
• Close each container by gently pressing its cap down on it while
turning the cap at the same time in a clockwise direction. This
turning should produce a few audible clicks, and should be
continued until the cap can be turned no further.
• CAUTION
: Please turn gently and do not use too much force!
1
2
3
1
2
3
