Step 2
(Bar Height Only)
Lay the chair on its side on a soft surface.
Set the tenons of the Back Leg Cross Piece into
the mortises located in the back legs.
Fasten using four - 2" Pandeck Screws.
Step 3
2" Pandeck Screws
Back Leg Cross Piece
Step 3 Detail
Place the Footrest Assembly between the chair legs.
Align the predrilled holes of the footrest with the predrilled
holes in the chair legs. Using the 5/32 Allen Drive Bit, fasten
it using 8 - 1/4" x 2" Lags
.
You may need to reverse your drill
several times before you are able to drive the lags in completely.
1/4" x 1 3/4" Lags
