Mayhew Chat Chair
Assembly Guide
Tools Required
Hardware Included
Cordless Drill
#2 Square Drive Bit
(Included)
5/32" Allen Drive Bit
(Included)
4 - 1" Buglehead Screws
8 - 2" Pandeck Screws
8 - 1/4" x 1 1/2" Lags
Step 1
Bottom View of Seat
Front of Seat
Back of Seat
Narrower Space
between seat support
and end of seat.
Wider Space
between seat support
and end of seat.
Front of Seat
Detail B.
Detail C
Detail A.
A.
Put one of the side
assemblies on a soft
surface and place the
seat onto it by fitting the
mortis and tenons of the
two pieces togther.
(See Detail A.)
Use the example above
to ensure the front of the
seat is correctly located.
B.
Using the #2
Square Drive Bit,
begin attaching the
seat by driving 2 - 2"
Pandeck Screws
through the pocket
holes located in the
very front and back
cross pieces of the
seat.
(See Detail B.)
C.
Finish attaching the seat to the
side assembly by using the 5/32
Allen Drive Bit to drive 4 - 1/4" x 1 1/2"
Lags through the pre-drilled holes.
in the side of the seat.
You may need to reverse your drill
several times before you are able to
drive the lag in completely.
2" Pandeck Screws
1/4" x 1 1/2" Lag
