Step 1
Set the Arm and Seat Assembly forward onto the front of the
Arms and set the Back Assembly on top. Be sure to do this
on top of a soft surface to avoid damaging the arms.
Fasten the Back to the Seat using eight - 4" Buglehead Screws.
Keeping the Arms Supports even with the outside edges of the
Back, fasten them using two - 3" Buglehead Screws.
Mayhew Sling
Dining Swivel Rocker
Assembly Guide
Tools Required
Hardware Included
Cordless Drill
#2 Square Drive Bit
(Included)
Allen Wrench
(Included)
2 - 3"
Buglehead
Screws
8 - 4"
Buglehead
Screws
Back Assembly
Arm & Seat Assembly
Keep the Arm Support even with the outside edge of the Back.
3" Buglehead Screws
4" Buglehead Screws
Wrench
6 - 5/16" X 1 3/4"
Allen Head Bolts
6 - 5/16"
Flange Nuts
6 - 5/16"
Lock Washers
6 - 5/16"
Square Nuts
3 - Fiberglass Springs
3 - Aluminum Plates
1 - Swivel Mechanism
6 - 5/16" X 1 1/4"
Allen Head Bolts
