Step 2
Poly Tab at End of back Support Should Point Downwards
1" Buglehead Screw
1" Buglehead Screw
Fit the Back into place by
placing the poly tabs at the
ends of the back supports into
the cutouts in the back leg of
the side assembly. Fasten
using 1 - 1" Buglehead Screw
for each poly tab.
Back Attachment Detail
Step 3
Step 4
(Counter, Bar & XT Heights Only)
Attach the second side
assembly by repeating
Steps 1 & 2.
Footrest Attachment Detail
Place the Footrest Assembly between
the chair legs. Align the predrilled
holes of the footrest with the predrilled
holes in the chair legs.
Using the 5/32 Allen Drive Bit, fasten
it using 8 - 1/4" x 2" Lags
.
You may need to reverse your drill
several times before you are able to
drive the lag in completely.
1/4" x 2" Lags
