Step 1
Cordless Drill
7/16" Wrench
1
4
" x 2"
Bolt x16
1
4
" Flange
Nut x16
1
1
2
" Buglehead
Screw x8
3" Buglehead
Screw
5
8
" Panhead
Screw x16
Umbrella Knob x2
Dining Height x24
Counter Height x40
Bar Height x40
Open the box containing the Table top on all sides
but leave the top laying in the box. Next fasten
cross pieces to 1 base end and 1 base center
assembly by inserting cross piece tenons into
mortises on base assembly and fasten using
3" Buglehead Screws. (Center base assembly has
mortises on both sides of legs) Repeat base
assembly with remaining base assembly. You will
have 2 seperate base assemblies once completed.
NOTE: Dining Height will only have 1 set of cross pieces.
Counter and Bar Height Only
3" Buglehead Screws
Allen Wrench
(Included)
#2 Square Drive Bit
Harbor Table Assembly Guide
Step 1
Hardware Included
Dining Height
Bar Height
Counter Height
Harbor Table Assembly 44"x96" (Dining, Counter & Bar Heights)
Tools / Items Needed
