Stainless Steel Heat Barrier Placement
Step 3
Step 4
Step 5
Place the stainless steel heat barrier on top of the
aluminum support pieces located at the edge of the
opening in the center of the fire pit top. Ensure that
the recessed edge of the heat barrier is turned
upward and remove the protective sticker.
Place the Burner on top of the recessed edge of
the Stainless Steel Heat Barrier.
For Installation of the Burner, connecting gas, igniter
and operation instructions, see The Outdoor Great Room
Company Crystal Fire Manual that is included with the Burner.
A.
Place Propane Tank on Tank Carrier and slide into the
base and close the door.
B.
Spread Fire Pit Gems into the Burner and spread evenly.
C.
Place the Glass Wind Guard on top of the Heat Barrier
so that the burner is centered in it.
Your Fire Pit or Table is complete!
