7
Controls
3
5
4
disengaged position
engaged position
>3 kg
<3 kg
6
Quick-release
coupling can be
fastened
in 4 different
positions.
Basic unit
Each component is fastened to the basic unit
using hex socket cap screw M6x10 2 .
1
8
Load spring can only be switched when
vertical tilt is in horizontal postion.
The position of the control lever of the 2-way tilt
head can be adjusted. To do this, take the
hexagon socket wrench 1 out of the transport
position and loosen the handle screw 8 . Then
move the handle into the desired position and
fasten again.
1
hexagon socket wrench
2
hex socket cap screw M6x10.
3 fixing latch for vertical swivel
4
f
riktion whee
l for vertical swivel
5 fixing latch for horizontal swivel
6 pan-head handle
7 switch for changing the load
8 handle screw
9
hex socket cap screw for 2-way handle
2