30 / 30
Caution!
Check all screws and nuts periodically for tightness, fastening them again as required.
Disassemble the gazebo in the reverse order of the assembly steps. Always disassemble the
gazebo completely. A partially disassembled gazebo is not stable enough to resist wind and bad
weather, and therefore can be damaged and/or cause damage.
Clean the gazebo with mild soap and water. Rinse thoroughly
,
and wait until the product is dry
before reassembling it.
Snow must be cleared off regularly during snowy days. Remove the snow at the roof top when it is
thicker than 2 inches. In order to avoid damage, use a plastic snow rake to remove excessive snow
and ice buildup from roof and keep away from falling debris.
Do not use bleach, acid, or other abrasive cleaners on the canopies or frame parts.
Keep instruction manual for future reference.
Keep the original packaging to store the gazebo.
Carefully check all packaging materials before discarding. Do not assemble if there are missing pieces.
For comments or questions please contact BJ’s Wholesale Club at 1-800-934-1204.
Please do not return this product to the store. For technical assistance on assembly or replacement
parts call Sunjoy Group at 1(866) 578-6569 anytime 24 hour /7 days a week or Email
[email protected] or visit www.sunjoyonline.com to place your order or fax your parts replacement
order form together with your purchase receipt to 951-667-3447 for assistance.
Production Number: 2021100532
Cleaning and Maintenance
Warranty
Summary of Contents for 254271
